nanobox
1 of 4
Sep 22, 2023
1. Insert the microSD card. The card must be in the slot for tangerine to load. The card is spring-
loaded. Push to eject when needed, but leave it in for now.
2. Connect the Line Out to your mixer, speakers or headphones.
3. Connect an optional MIDI controller to the MIDI IN jack. TRS Type A and B are supported.
4. Connect the USB power cable.
5. Finger drum on the Pads Home screen or the MIDI controller and you are ready to make some
beats!
GET SET UP
nanobox | tangerine Quick Start Guide
INTRODUCING NANOBOX | TANGERINE
HOME BUTTON
Go to the Pads
Home, Keys
screen, or the
Sequencer Home.
LAYER BUTTON
Access the Mixer, Mutes
and FX Controls. Cycle
through pads, fx params
or sequence pages.
Pads
Tap to play. The orange
pad is selected. The
white bar shows
progress.
LEFT ARROW BUTTON
Go back to the previous screen.
RIGHT ARROW BUTTON
Access more detail about the
current selection.
KNOBS
Top knob adjusts
master volume,
bottom knob
selects a pad.
Master Volume
Turn the top knob
to adjust.
CLOCK
The current Measure and beat.
Touch to open Transports pop-up.
Menu
Copy and paste within
and across presets.
PRESET NAME
Touch to load and save presets.
Trigger pads
with a MIDI
Controller on
notes C2 (36) -
G2 (43).
To Next Page
Need help?
General
