Need help?Do you have a question about the 1010music Blackbox and is the answer not in the manual?
General| Polyphony | 16 voices |
|---|---|
| Storage | MicroSD card slot |
| Sample Rate | 48 kHz |
| Bit Depth | 24-bit |
| Weight | 1.1 lbs |
| Type | Sampler, Sequencer |
| Sequencer | Yes |
| Screen | Yes |
| Power Supply | USB power |
| Dimensions | 5.5" x 5" x 1.5" |
Inserting the microSD card and connecting power.
Connecting outputs, controlling volume, and testing the setup.
Connecting audio sources for recording samples.
Explains the basic navigation flow of the device.
Describes the main display elements and their functions.
Loading presets, exploring pads, keys, and sequences.
Organizing sequences into sections and using song mode controls.
Steps to create and name a new preset.
Steps for loading samples, assigning modes, and configuring parameters.
Details on Sample, Single Sample, and Multi-Sample pad modes.
Details on Clip/Slicer modes, parameters, and slice creation.
Details on Granular Mode and its specific parameters.
Step-by-step guide to recording a single audio sample.
Strategies for managing recorded WAV files for presets or libraries.
Techniques for recording with sequences or resampling.
Automating multi-sample recording using external MIDI or CV.
Using a computer to manage WAV files on the microSD card.
Deleting, saving as, or renaming WAV files directly on the device.
Consolidating preset files for easier management.
Playing pads using the traditional keyboard interface.
Playing pads using the grid-based keyboard interface.
Triggering individual slices of a slicer pad using the keyboard.
Setting scales and root notes for the grid keyboard.
Recording and playback of note and trigger sequences.
Editing sequence data, parameters, and using clipboard functions.
Adjusting note velocity/probability and importing MIDI files.
Toggling song mode, recording, playing, and editing song sections.
Adjusting tempo and applying swing for rhythmic feel.
Sending a pad's signal to an effect processor.
Adjusting the settings for the available effects.
Controlling volume and stereo panning for individual pads.
Silencing individual pads temporarily.
Saving current work, loading presets, and saving as new.
Packing, cleaning unused files, deleting, and renaming presets.
Managing preset files on microSD and handling legacy presets.
Global settings for brightness, headphone volume, and compressor.
Configuring MIDI input channels and parameters for pads and sequences.
Settings for clock synchronization and metronome.
Connecting and using MIDI devices for input.
Triggering pads/sequences, modulation, MIDI Learn, and channel sharing.
Using Program Change to load presets and sending MIDI to external devices.
Setting up Blackbox to sync with external clock sources.
Outputting Blackbox's clock signal to other devices.
Methods for resetting the clock counter.
Setting up pad modes and parameters without a sample.
Loading samples into pre-configured template pads.
Reducing aliasing by using the High Quality interpolation algorithm.
Safely changing microSD cards without powering down.
Importance of backing up data before firmware updates.
Step-by-step process for installing new firmware.
Links to resources for learning and updates.
Information on community forums for user support.
How to get in touch with support.
To Next Page
