What to do if the 1byone Cleaning Equipment spray bottle does not work?
If the spray bottle of your 1byone Cleaning Equipment isn't working, first, check if it's empty and refill it with water or cleaning agent. Then, ensure the tip is set to either SPRAY or STREAM, not OFF. If the problem persists, the spray bottle might be defective.
Why does my 1byone Cleaning Equipment leave streaks?
Streaks appearing during cleaning with your 1byone Cleaning Equipment can be due to several reasons. The vacuum head may be dirty, so try cleaning it. Also, the vacuum attachment’s rubber squeegee strip might be worn. You can try removing the rubber squeegee strip by pulling it out sideways from the vacuum attachment, moisten the strip and push it back onto the vacuum attachment. Finally, you might be using too much cleaning agent; try using less.
General| Brand | 1byone |
|---|---|
| Model | BEAUTURAL 1-JU12UK01 |
| Category | Cleaning Equipment |
| Language | English |
Essential safety precautions for using the cleaner, especially concerning electrical products and children.
Lists all components included in the product package, ensuring completeness before first use.
Steps to prepare the cleaner for operation, including removing packaging and connecting parts.
Instructions on connecting the charger and indicators for charging status and completion.
Step-by-step guide to using the spray bottle and wiping attachment for initial window cleaning.
Procedure for using the vacuum function to remove wetness and dirt from cleaned window surfaces.
Instructions for emptying and cleaning the components of the spray bottle.
Guidelines for machine washing the microfibre cover, including restrictions on conditioners and bleach.
Detailed steps for disassembling and cleaning the main body and vacuum attachment.
Information on how to properly dispose of the window cleaner unit according to regulations.
Instructions for the correct disposal of used batteries to prevent pollution.
To Next Page