18
EN
Using the Power Station
1) Powering DC appliances
Turn on the power switch, press the DC/Car Charger Output ON/OFF button, the DC sockets
and the car charger will start to work and output 12V. Connect the electrical appliance to the
desired power interface.
Protection Mode:
Short circuit/over power protection: If the DC output has a short circuit or the output
is overpowered (load > 120W), the device will turn off the DC output for protection.
After troubleshooting, turn the DC output back on to power the device.
The DC output voltage range of this device is 11.4V-12.6V, and the maximum output current
is 10A.
To Next Page
Loading...