25
EN
Application scenario
(1) Outdoor
Car equipment: car fridge, car vacuum cleaner, pump and another car equipment;
Camping equipment: garden electric tools (power tools such as blowers, lawnmowers,
electric drills, electric saws), LED lights, etc.
(2) Indoor
Refrigerator, kitchen devices such as kettle, toaster, blender, coffee maker, gas boiler,
laptops, phones, lighting, etc.
Examples of loads
(1) Most electrical appliances in the market apply to the specifications of 12V/30A (XT60
or SPC45), 12V/10A, cigarette lighter, USB-A, and USB-C output ports of charger. But still,
the charging of some products may activate the over-current protection if it generates an
instantaneous high current at the moment of starting.
(2) Charger can power electrical products with 5500W or less rated power. Though the figure
is under 5000W, overload protection will still be activated when the appliance generates a
massive instantaneous start-up power. Therefore, it’s recommended to apply charger to
electrical products with lower-rated power.
(3) If an output over-current, overload, or short circuit occurs, device will turn off the
corresponding output port. Then it will automatically start again at an interval of 15s).
If the output repeatedly stops, turn the equipment off. Please get in touch with the seller or
maintenance group first for professional help.
(4) When the battery level drops to 0%, the DC and AC output will automatically turn off.
Please check the battery level before using device to protect and enhance battery cycle life.
(5) This device supports charging and discharging simultaneously, and please keep the
equipment laid flat during use, charging, and discharging.
To Next Page
Loading...