2Wire 802.11g PC Card Wireless Adapter - Installation Guide Overview

1
2Wire 802.11g Wireless PC Card
2Wire’s 802.11g Wireless PC Card is a wireless network card that fits into any
standard PC Card Type II slot. Using this adapter gives you the same connectivity
as Ethernet without the wires. Expanding or redesigning your network is easy, and
unlike cabled Ethernet, the 2Wire 802.11g Wireless PC Card allows you to roam
throughout the home or office while remaining connected to the local area network
(LAN).
Follow these steps to complete the adapter installation:
Step 1 - Install the 2Wire 802.11g Wireless PC Card.
Step 2 - Install the adapter driver from your 2Wire Wireless Installation CD.
The following sections give you detailed instructions for completing each step.