360 Vision Predator Hybrid PREDHYB-PSU-SM User Manual

Predator Hybrid Installation Manual V2.1.25 Page 1
© 360 Vision Technology Ltd.
Predator Hybrid
(Analogue & HD/IP)
Installation/Conguration Manual
The Predator Hybrid camera is shipped from 360 Vision Technology in analogue mode.
When in analogue mode. Please note: No IP Video.

360 Vision Predator Hybrid PREDHYB-PSU-SM Specifications

General

Image Sensor	1/2.8" Progressive Scan CMOS
Optical Zoom	4x
Digital Zoom	16x
Pan Range	360° continuous
Ingress Protection	IP66
Night Vision	Yes
Focal Length	2.8-12mm
Tilt Range	90°
Video Compression	H.264
Power Supply	24V AC
Operating Temperature	-30°C to +60°C
Storage	MicroSD
Connectivity	Ethernet

Summary

1 Safety and Precautions

4 Connections

5 Connections to Predators with HMA

30Vdc Power Connections (HMA)

Details 30Vdc power connections for Predators fitted with HMA.

Ethernet Connections (HMA)

Outlines Ethernet connections for Predators fitted with HMA using CAT5/5e/6.

6 Basic Twisted Pair/RS485 Data Wiring

7 Predator Protocol/Address setup

8 Predator OSD

9 OSD Operation/Navigation

10 Locating the Predator Hybrid on your Network

11 Connecting to the Predator Hybrid

11.1 Live View

11.2 Settings

11.2.1 Video

Configures camera name, stream type, codec, resolution, framerate, and bit rate.

11.2.2 Video Advanced

11.2.3 Advanced Features

Privacy Zones

Allows obscuring parts of the scene to create privacy zones.

11.2.4 Camera

Steady Shot

Reduces camera shake for a more stable image.

Stable Zoom

Minimizes vibration effects on image at wide angles and during zoom.

Night Settings

Configures camera behavior and illumination for low-light conditions.

Night Focus Range

Sets camera focus to suit light source in mono mode.

11.2.5 PTZ Zones

11.2.6 Date/Time

11.2.7 Network

Web Server

Enables or disables HTTP access and configures HTTPS port.

11.2.8 Interfaces

Auxiliary Functions

Configures camera functions using ONVIF Auxiliary commands.

Force ONVIF Version Configuration

Allows changing the ONVIF version reported by the camera to the VMS.

Pre-defined Presets

11.2.9 Recording

11.2.10 Audio

11.3 Add/Edit Users

11.4 Maintenance

Parameters and Settings

Reset Settings

Camera Maintenance

Covers camera reboot options and firmware updates.

11.5 Browser

12 Network Settings Recovery

13 Special Presets