Defining System Settings 107
Configuring the
System Name
The System Name Page allows the Network Administrator to provide a
user-defined system name, location, and contact information for the
device.
Monitor users have no access to this page.
To configure the System Name:
1 Click Administration > System Name > System Name. The System
Name Page opens:
Figure 54 System Name Page
The System Name Page includes the following fields:
■ System Name — Defines the user-defined device name. The field
length is 0-255 characters.
■ System Location — Defines the location where the system is
currently running. The field length is 0-255 characters.
■ System Contact — Defines the name of the contact person. The field
length is 0-255 characters.
2 Define the fields.
3 Click . The System Name is enabled, and the device is updated.
To Next Page
Loading...
