123
Configuring Link
Aggregation
The Link Aggregation Create Page optimizes port usage by linking a
group of ports together to form a single LAG.
Monitor users have no access to this page.
To create Link Aggregation:
1 Click Ports > Link Aggregation > Create. The Link Aggregation Create
Page opens:
Figure 62 Link Aggregation Create Page
The Link Aggregation Create Page includes the following fields:
■ Enter aggregation group ID — Defines the group ID. The field
range is 1-4.
■ Manual — Selects the link aggregation type to be static.
■ LACP — Selects the link aggregation type to be LACP.
■ Select ports for the new aggregation — Selects the ports for
which the link aggregation parameters are to be defined. The ports
are color-coded as follows:
Selected ports
■ Blue — Displays a member of the aggregation being created.
To Next Page
Loading...
