128 CHAPTER 7: AGGREGATING PORTS
Viewing LACP Aggregated links can be set up manually or automatically established by
enabling LACP on the relevant links. Aggregate ports can be linked into
link-aggregation port-groups. The
LACP Summary Page displays key
information for each Link Aggregation Group Protocol (LACP) LAG.
To view LACP for LAGs:
1 Click Port > LACP > Summary. The LACP Summary Page opens:
Figure 65 LACP Summary Page
The LACP Summary Page contains the following fields:
■ Port — Displays the port number to which timeout and priority values
are assigned.
■ State — Displays the operational values of the actor’s state
parameters. The possible field values are N/A or Active.
■ Group ID — Displays the Link Aggregated Group ID.
■ Port Priority — Displays the LACP priority value for the port. The
default is 1. The field range is 1-65535.
To Next Page
Loading...
