134 CHAPTER 8: CONFIGURING VLANS
Creating VLANs The VLAN Setup Page allows the network administrator to create or
rename VLANs.
Monitor users have no access to this page.
To create VLANs:
1 Click Device > VLAN > Setup. The VLAN Setup Page opens:
Figure 69 VLAN Setup Page
The VLAN Setup Page contains the following fields:
Create VLANs
■ ID(s) — Defines the VLAN ID(s) to create.
■ Create — Creates the VLAN ID(s).
VLAN List
■ ID — Displays the VLAN ID.
■ Name — Displays the user-defined VLAN name.
2 Enter the VLAN ID number(s).
3 Click . The VLAN(s) are created, and the device is updated.
To Next Page
Loading...
