136 CHAPTER 8: CONFIGURING VLANS
Modifying VLAN
Settings
The Modify VLAN Page allows the network manager to change VLAN
membership.
Monitor users have no access to this page.
To edit VLAN Settings:
Click Device > VLAN > Modify VLAN. The Modify VLAN Page opens:
Figure 71 Modify VLAN Page
The Modify VLAN Page contains the following fields:
■ Select a VLAN to modify — Selects a VLAN to modify its settings.
■ Select membership type — Selects the membership type for each
port on the VLAN. The possible field values are:
■ Untagged — Indicates the interface is an untagged member of the
VLAN.
■ Tagged — Indicates the interface is a tagged member of a VLAN.
VLAN tagged frames are forwarded by the interface. The frames
contain VLAN information.
■ Not A Member — Indicates the interface is not a member of the
VLAN.
To Next Page
Loading...
