138 CHAPTER 8: CONFIGURING VLANS
Modifying Port VLAN
Settings
The Modify Port Page allows the network manager to modify port VLAN
settings.
Monitor users have no access to this page.
To modify Port VLAN Settings:
1 Click Device > VLAN > Modify Port. The Modify Port Page opens:
Figure 72 Modify Port Page
The Modify Port Page contains the following fields:
■ Select a Port — Selects a port to be modified.
■ Select membership type — Displays the membership type for each
port on the VLAN. The possible field values are:
■ Untagged — Indicates the interface is an untagged member of the
VLAN.
■ Tagged — Indicates the interface is a tagged member of a VLAN.
VLAN tagged frames are forwarded by the interface. The frames
contain VLAN information.
■ Not A Member — Indicates the interface is not a member of the
VLAN.
■ Not available for selection — Indicates the interface is not available
for selection.
To Next Page
Loading...
