146 CHAPTER 9: CONFIGURING IP AND MAC ADDRESS INFORMATION
Removing ARP
Entries
The ARP Settings Remove Page provides parameters for removing ARP
entries from the ARP Table.
Monitor user has no access to this page.
To remove ARP entries:
1 Click Administration > ARP Settings > Remove. The ARP Settings
Remove Page opens:
Figure 77 ARP Settings Remove Page
The ARP Settings Remove Page contains the following fields:
■ Clear ARP Table Entries — Specifies the types of ARP entries that are
cleared. The possible values are:
■ None — Maintains the ARP entries.
■ All — Clears all ARP entries.
■ Dynamic — Clears only dynamic ARP entries.
■ Static — Clears only static ARP entries.
■ Checkbox (unnamed) — Selects the ARP entry for removal.
■ Interface — Indicates the VLAN for which ARP parameters are
defined.
■ IP Address — Indicates the station IP address which is associated with
the MAC address.
To Next Page
Loading...
