173
Viewing CoS to
Queue Mapping
The CoS to Queue Summary Page contains a table that displays the CoS
values mapped to four traffic queues. Eight separate traffic classes are
defined in IEEE 802.1p. The default priority levels are assigned according
to recommendations in the IEEE 802.1p standard.
To view CoS Values to Queues:
1 Click Device > QoS > CoS to Queue > Summary. The CoS to Queue
Summary Page opens:
Figure 90 CoS to Queue Summary Page
The CoS to Queue Summary Page contains the following fields:
■ Class of Service — Displays the CoS priority tag values, where 0 is
the lowest and 7 is the highest.
■ Queue — Indicates the traffic forwarding queue to which the CoS
priority is mapped. Four traffic priority queues are supported.
To Next Page
Loading...
