Defining RADIUS Clients 59
Defining RADIUS
Clients
Remote Authorization Dial-In User Service (RADIUS) servers provide
additional security for networks. RADIUS servers provide a centralized
authentication method for 802.1X.
Monitor users have no access to this page.
To configure the RADIUS client:
1 Click Security > RADIUS Client > Configure. The RADIUS Client
Configure Page opens:
Figure 27 RADIUS Client Configure Page
The RADIUS Client Configure Page contains the following fields:
■ Primary Server — Defines the RADIUS Primary Server authentication
fields.
■ Backup Server — Defines the RADIUS Backup Server authentication
fields.
■ IP Address — Defines the RADIUS Server IP address.
■ UDP Port — Defines the authentication port. The authentication port
is used to verify RADIUS server authentication. The authentication port
default is 1812.
■ Max Retries — Defines the number of transmitted requests sent to
the RADIUS server before a failure occurs. Possible field values are
1-30. The default value is 2.
■ Timeout — Defines the amount of time (in seconds) the device waits
for an answer from the RADIUS server before retrying the query, or
To Next Page
Loading...
