Defining Local Database Authentication 67
Configuring Local
Database
Authentication
The Local Database Setup Page allows the network administrator to
globally enable or disable local-database authentication for the switch.
Monitor users have no access to this page.
To configure Local Database Settings:
1 Click Port > Local Database > Setup. The Local Database Setup Page
opens:
Figure 30 Local Database Setup Page
The Local Database Setup Page contains the following fields:
■ System Authentication Control — Configures local-database
authentication globally for the switch. The possible field values are:
■ Enabled — Enables local database authentication on the device.
■ Disabled — Disables local database authentication on the device.
This is the default.
2 Define the fields.
3 Click . The Local Database Settings are enabled, and the device is
updated.
To Next Page
Loading...
