3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch - Configuring HTTPS

Encrypting Connection to the Web Interface (HTTPS) 75
The client and server establish a secure encrypted connection.
A padlock icon should appear in the status bar for Internet Explorer 5.x or
above, Netscape 6.2 or above, and Mozilla Firefox 2.0.0.0 or above.
Configuring HTTPS The HTTPS Configure Page allows network administrators to enable or
disable HTTPS and set the TCP port number for this service.
Monitor users have no access to this page.
To configure HTTPS settings:
1 Click Security > HTTPS Settings > Configure. The HTTPS Configure
Page opens:
Figure 37 HTTPS Configure Page
The HTTPS Configure Page contains the following fields:
■ HTTPS Status — Specifies if HTTPS is enabled on the device. The
possible predefined field values are:
■ Enabled — HTTPS is enabled on the device. This is the default.
Tab le 9 HTTPS System Support
Web Browser Operating System
Internet Explorer
5.0 or later
Windows 98,Windows NT (with service pack 6a), Windows
2000, Windows XP
Netscape
6.2 or later
Windows 98,Windows NT (with service pack 6a), Windows
2000, Windows XP, Solaris 2.6
Mozilla Firefox
2.0.0.0 or later
Windows 2000, Windows XP, Linux