10 CHAPTER 2 Installing your 3Com Wireless 7760 Access Point
To install the locking bar, push the locking bar through the
opening in the side of the mounting bracket until the hole on the
locking bar is exposed. Insert a lock (not provided) through the
hole on the locking bar, and then close the lock to secure it in
place.
Checking the LED
Indicators
When the AP is connected to power, LEDs indicate activity as
follows:
LED Color Activity
Power Green On: Power On
Off: Power Off
11a Green On: WLAN On
Blinking: sending/receiving data from
wireless LAN
Off: Transmitter is off
Green On: WLAN On
11b/g
Blinking: sending/receiving data from
wireless LAN
Off: Transmitter is off
100 Green On: Good Link
Blinking: sending/receiving data from
LAN Port
Off: No link
10
Green On: Good Link
Blinking: sending/receiving data from
LAN Port
Off: No link
To Next Page
Loading...
