EasyManua.ls Logo

3Com 3CRWE776075 - Configuring Multiple Wireless Networks (SSIDs); Selecting Wireless Operating Modes

3Com 3CRWE776075
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 CHAPTER 3 Configuring the Wireless 7760
Wireless Network The Wireless 7760 supports Multiple SSIDs which allows it to act as
multiple APs appearing in a Wireless LAN network. You can
configure up to 4 SSIDs on the device.
Wireless Mode
You can select your desired wireless operating mode from the
drop-down manual.
The AP supports
Super Dynamic
and
Static
modes and boosts
throughput up to 108 Mbps.
The
Super Dynamic
mode allows automatic switching between
normal and turbo modes without modification by the user. The
feature increases throughput when bandwidth demands are high.
When bandwidth demands are low and at regular intervals,
normal mode allows legacy connectivity and new associations. The
Super Dynamic
mode connection between the Ethernet Adapter
and the access point may turn to normal mode connection if
another station associates with the access point in normal mode.
The
Super Static
mode operates by using two radio channels and
does not switch to normal mode.
Super Static
mode must be
configured by the user on both the access point and the station.
Note that in order to enable Super mode, the opposite client
service needs to provide the same specification.

Related product manuals