3Com 3CRWX120695A - Display Ip Alias

display ip alias 119
Examples — The following command displays all the IP interfaces
configured on a WX switch:
WX4400# display interface
VLAN Name Address Mask Enabled State
---- --------------- --------------- --------------- ------- -----
1 default 10.10.10.10 255.255.255.0 YES Up
2 mauve 10.10.20.10 255.255.255.0 NO Down
Table 27 describes the fields in this display.
See Also
■ “set interface” on page 135
■ “set interface status” on page 136
display ip alias Shows the IP aliases configured on the wireless LAN switch.
Syntax — display ip alias [name]
■ name — Alias string.
Default — If you do not specify an alias name, all aliases are displayed.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Table 27 Output for display interface
Field Description
VLAN VLAN number
Name VLAN name
Address IP address
Mask Subnet mask
Enabled Administrative state:
■ YES (enabled)
■ NO (disabled)
State Link state:
■ Up (operational)
■ Down (unavailable)