130 CHAPTER 6: IP SERVICES COMMANDS
Examples — To display the summertime setting on a WX switch, type
the following command:
WX1200# display summertime
Summertime is enabled, and set to 'PDT'.
Start : Sun Apr 04 2004, 02:00:00
End : Sun Oct 31 2004, 02:00:00
Offset : 60 minutes
Recurring : yes, starting at 2:00 am of first Sunday of April
and ending at 2:00 am on last Sunday of October.
See Also
■ “clear summertime” on page 115
■ “clear timezone” on page 116
■ “display timedate” on page 130
■ “display timezone” on page 131
■ “set summertime” on page 153
■ “set timedate” on page 156
■ “set timezone” on page 157
display timedate Shows the date and time of day currently set on a wireless LAN switch’s
real-time clock.
Syntax —
display timedate
Default — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — To display the time and date set on a WX switch’s real-time
clock, type the following command:
WX1200# display timedate
Sun Feb 29 2004, 23:59:02 PST
See Also
■ “clear summertime” on page 115
■ “clear timezone” on page 116
To Next Page
Loading...
