184 CHAPTER 7: AAA COMMANDS
See Also
■ “clear accounting” on page 165
■ “display aaa” on page 180
■ “set accounting {admin | console}” on page 186
display location
policy
Displays the list of location policy rules that make up the location policy
on an WX switch.
Syntax —
display location policy
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Event-Timestamp Time (in seconds since January 1, 1970) at which the event
was triggered. (See RFC 2869 for more information.)
Acct-Session-Time Number of seconds that the session has been online.
Acct-Output-Octets Number of octets the WX switch has sent during the
session.
Acct-Input-Octets Number of octets the WX switch has received during the
session.
Acct-Output-Packets Number of packets the WX switch has sent during the
session.
Acct-Input-Packets Number of packets the WX switch has received during the
session.
Vlan-Name Name of the client’s VLAN.
Calling-Station-Id MAC address of the supplicant (client).
Nas-Port-Id Number of the port and radio on the MAP access point
through which the session was conducted.
Called-Station-Id MAC address of the MAP access point through which the
client reached the network.
Table 39 display accounting statistics Output (continued)
To Next Page
Loading...
