258 CHAPTER 9: MANAGED ACCESS POINT COMMANDS
WX4400# display service-profile wpa_clients
ssid-name: private ssid-type: crypto
beacon: yes auth-fallthru: web-auth
WEP Key 1 value: <none> WEP Key 2 value: <none>
WEP Key 3 value: <none> WEP Key 4 value: <none>
WEP Unicast Index: 1 WEP Multicast Index: 1
Shared Key Auth: NO
WPA enabled:
ciphers: cipher-tkip
authentication: 802.1X
TKIP countermeasures time: 60000ms
Table 56 describes the fields in this display.
Table 56 Output for display service-profile
Field Description
ssid-name Service set identifier (SSID) managed by this service profile.
ssid-type SSID type:
■ crypto — Wireless traffic for the SSID is encrypted.
■ clear — Wireless traffic for the SSID is unencrypted.
beacon Indicates whether the radio sends beacons, to advertise the
SSID:
■ no
■ yes
auth-fallthru Secondary (fallthru) encryption type when a user tries to
authenticate but the WX switch managing the radio does
not have an authentication rule with a userglob that matches
the username.
■ last-resort — Automatically authenticates the user and
allows access to the SSID requested by the user, without
requiring a username and password.
■ none—Denies authentication and prohibits the user from
accessing the SSID.
■ web-auth — Redirects the user to a web page for login
to the SSID.
To Next Page
Loading...
