set service-profile beacon 299
set service-profile
beacon
Disables or reenables beaconing of the SSID managed by the service
profile.
A MAP radio responds to an 802.11 probe any request with only the
beaconed SSID(s). For a nonbeaconed SSID, radios respond only to
directed 802.11 probe requests that match the nonbeaconed SSID’s SSID
string.
Syntax —
set service-profile name beaconed {enable | disable}
■ name — Service profile name.
■ enable — Enables beaconing of the SSID managed by the service
profile.
■ disable — Disables beaconing of the SSID managed by the service
profile.
Defaults — Beaconing is enabled by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command disables beaconing of the SSID
managed by service profile sp2:
WX4400# set service-profile sp2 beacon disable
success: change accepted.
See Also
■ “display service-profile” on page 257
■ “set radio-profile beacon-interval” on page 282
■ “set service-profile ssid-name” on page 307
■ “set service-profile ssid-type” on page 307
set service-profile
cipher-ccmp
Enables Counter with Cipher Block Chaining Message Authentication
Code Protocol (CCMP) encryption with WPA clients, for a service profile.
Syntax —
set service-profile name cipher-ccmp
{enable | disable}
■ name — Service profile name.
To Next Page
Loading...
