display dot1x 421
Defaults — The default is 5 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — Type the following command to reset the EAPoL
retransmission time:
WX4400# clear dot1x tx-period
success: change accepted.
See Also
■ “display dot1x” on page 421
■ “set dot1x tx-period” on page 432
display dot1x Displays 802.1X client information for statistics and configuration
settings.
Syntax —
display dot1x {clients | stats | config}
■ clients — Displays information about active 802.1X clients,
including client name, MAC address, and state.
■ stats — Displays global 802.1X statistics associated with connecting
and authenticating.
■ config — Displays a summary of the current configuration.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
To Next Page
Loading...
