display dot1x 423
Type the following command to display the 802.1X configuration:
WX1200# display dot1x config
Username Protocol
-------- --------
*@xmple.com PASSTHRU
*@sqa.com PASSTHRU
nash@sqa.com ! PASSTHRU
EXAMPLE\* PEAP (MSCHAPv2)
DBC-PROJECTOR\* PEAP (MSCHAPv2)
host/*.xmple.com PASSTHRU
802.1X parameter setting
---------------- -------
supplicant timeout 30
auth-server timeout 30
quiet period 5
transmit period 5
reauthentication period 3600
maximum requests 2
key transmission enabled
reauthentication enabled
authentication control enabled
WEP rekey period 1800
WEP rekey enabled
Bonded period 60
port 5, authcontrol: auto, max-sessions: 16
port 6, authcontrol: auto, max-sessions: 1
port 7, authcontrol: auto, max-sessions: 1
port 8, authcontrol: auto, max-sessions: 1
To Next Page
Loading...
