clear sessions network 437
character—either an at sign (@) or a period (.). (For details, see “User
Globs” on page 24.)
■ mac-addr mac-addr-glob — Clears all network sessions for a MAC
address. Specify a MAC address in hexadecimal numbers separated by
colons (:), or use the wildcard character (*) to specify a set of MAC
addresses. (For details, see “MAC Address Globs” on page 25.)
■ vlan vlan-glob — Clears all network sessions on a single VLAN or a
set of VLANs.
Specify a VLAN name, use the double-asterisk wildcard character (**)
to specify all VLAN names, or use the single-asterisk wildcard
character (*) to specify a set of VLAN names up to or following the
first delimiter character, either an at sign (@) or a period (.). (For
details, see “VLAN Globs” on page 26.)
■ session-id local-session-id — Clears the specified 802.1X
network session. To find local session IDs, use the display sessions
command.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — The clear sessions network command clears network
sessions by deauthenticating and, for wireless clients, disassociating
them.
Examples — To clear all sessions for MAC address 00:01:02:03:04:05,
type the following command:
WX4400# clear sessions network mac-addr 00:01:02:03:04:05
To clear session 9, type the following command:
WX1200# clear sessions network session-id 9
SM Apr 11 19:53:38 DEBUG SM-STATE: localid 9, mac 00:06:25:09:39:5d,
flags 0000012fh, to change state to KILLING
Localid 9, globalid SESSION-9-893249336 moved from ACTIVE to KILLING
(client=00:06:25:09:39:5d)
To clear the session of user Natasha, type the following command:
WX1200# clear sessions network user Natasha
To Next Page
Loading...
