438 CHAPTER 16: SESSION MANAGEMENT COMMANDS
To clear the sessions of users whose name begins with the characters Jo,
type the following command:
WX1200# clear sessions network user Jo*
To clear the sessions of all users on VLAN red, type the following
command:
WX1200# clear sessions network vlan red
See Also
■ “display sessions” on page 438
■ “display sessions network” on page 440
display sessions Displays session information and statistics for all users with administrative
access to the WX switch, or for administrative users with either console or
Telnet access.
Syntax —
display sessions {admin | console | telnet
[client]}
■ admin — Displays sessions for all users with administrative access to
the WX switch through a Telnet or SSH connection or a console
plugged into the switch.
■ console — Displays sessions for all users with administrative access to
the WX switch through a console plugged into the switch.
■ telnet — Displays sessions for all users with administrative access to
the WX switch through a Telnet connection.
■ telnet client — Displays Telnet sessions from the CLI to remote
devices.
Defaults — None.
Access — All, except for display sessions telnet client, which has
enabled access.
History — Introduced in MSS Version 3.0.
To Next Page
Loading...
