3Com 3CRWX120695A - Page 468

468 CHAPTER 18: FILE MANAGEMENT COMMANDS
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the files in the root
directory:
WX4400# dir
===============================================================================
file:
Filename Size Created
file:configuration 17 KB May 21 2004, 18:20:53
file:configuration.txt 379 bytes May 09 2004, 18:55:17
file:dangcfg 13 KB May 16 2004, 18:30:44
dangdir/ 512 bytes May 16 2004, 17:23:44
old/ 512 bytes Sep 23 2003, 21:58:48
Total: 32 Kbytes used, 207824 Kbytes free
===============================================================================
Boot:
Filename Size Created
*boot0:bload 746 KB May 09 2004, 19:02:16
*boot0:WXA03002.Rel 8182 KB May 09 2004, 18:58:16
boot1:WXA03001.Rel 8197 KB May 21 2004, 18:01:02
Boot0: Total: 8928 Kbytes used, 3312 Kbytes free
Boot1: Total: 8197 Kbytes used, 4060 Kbytes free
===============================================================================
temporary files:
Filename Size Created
Total: 0 bytes used, 93537 Kbytes free
Total: 15 Kbytes used, 90941 Kbytes free
The following command displays the files in the old subdirectory:
WX4400# dir old
===============================================================================
file:
Filename Size Created
file:configuration.txt 3541 bytes Sep 22 2003, 22:55:44
file:configuration.xml 24 KB Sep 22 2003, 22:55:44
Total: 27 Kbytes used, 207824 Kbytes free
Table 90 describes the fields in the dir output.