display trace 483
See Also
■ “display trace” on page 483
■ “set trace authentication” on page 484
■ “set trace authorization” on page 485
■ “set trace dot1x” on page 486
■ “set trace sm” on page 486
display trace Displays information about traces that are currently configured on the
WX switch, or all possible trace options.
Syntax —
display trace [all]
■ all — Displays all possible trace options and their configuration.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To view the traces currently running, type the following
command:
WX4400# display trace
milliseconds spent printing traces: 1885.614
Trace Area Level Mac User Port Filter
-------------------- ----- ----------------- ----------------- ---- --------
dot1x 5 0
sm 5 0
See Also
■ “clear trace” on page 482
■ “set trace authentication” on page 484
■ “set trace authorization” on page 485
■ “set trace dot1x” on page 486
■ “set trace sm” on page 486
To Next Page
Loading...
