delete 505
■ “display” on page 507
■ “next” on page 511
delete Removes the currently active boot profile. (For information about boot
profiles, see “display” on page 507.)
Syntax —
delete
Defaults — None.
Access — Boot prompt.
History — Introduced in MSS Version 3.0.
Usage — When you type the delete command, the next-lower
numbered boot profile becomes the active profile. For example, if the
currently active profile is number 3, profile number 2 becomes active after
you type delete to delete profile 3. You cannot delete boot profile 0.
Examples — To remove the currently active boot profile, type the
following command:
boot> delete
BOOT Index: 1
BOOT TYPE: c
DEVICE: boot1:
FILENAME: default
FLAGS: 00000000
OPTIONS: run=nos;boot=0
See Also
■ “change” on page 503
■ “create” on page 504
■ “display” on page 507
■ “next” on page 511
diag Accesses the diagnostic mode.
Syntax — diag
To Next Page
Loading...
