46 CHAPTER 3: CONFIGURING A WX SWITCH FOR BASIC SERVICE
WX1200# ping 10.10.20.19
PING 10.10.20.19 (10.10.20.19) from 10.10.20.2 : 56(84) bytes of data.
64 bytes from 10.10.20.19: icmp_seq=1 ttl=255 time=0.769 ms
64 bytes from 10.10.20.19: icmp_seq=2 ttl=255 time=0.628 ms
64 bytes from 10.10.20.19: icmp_seq=3 ttl=255 time=0.676 ms
64 bytes from 10.10.20.19: icmp_seq=4 ttl=255 time=0.619 ms
64 bytes from 10.10.20.19: icmp_seq=5 ttl=255 time=0.608 ms
--- 20.20.20.1 ping statistics ---
5 packets transmitted, 5 packets received, 0 errors, 0% packet loss
Enabling Secure
Communication for
3WXM or Web
Manager
To enable secure communication between 3WXM or Web Manager and a
WX switch, install a server certificate on the WX switch. (See “Installing a
Certificate” on page 47.)
For Web Manager, you also need to enable Transport Layer Security (TLS)
on the Web browser. (See “Enabling TLS on a Web Browser and Logging
In to Web View” on page 55.)
Figure 8 shows an example of a WX switch prepared for 3WXM with
certificate authority (CA) certificates.
To Next Page
Loading...
