144 CHAPTER 4: PLANNING THE 3COM MOBILITY SYSTEM
Go to “Specifying Association Information”.
Specifying Association Information
To specify association information:
1 In the Mobility Domain list, select the Mobility Domain that contains the
MAPs used for this coverage area.
2 In the Radio Profile list, select the radio profile used for this coverage area.
The profiles available depend on the Mobility Domain you selected in
step 1. The profile you select applies to all radios associated with the
coverage area.
To create a new profile, click Create. The Create Radio Profile wizard
appears. (See “Configuring a Radio Profile” on page 265.)
To Next Page
Loading...
