176 CHAPTER 4: PLANNING THE 3COM MOBILITY SYSTEM
The network plan’s Mobility Domains are listed in the Scope section.
2 Select the scope.
If you select a Mobility Domain as the scope, the change is also applied to
the Domain Policies in the Mobility Domain.
3 Select the RF Auto-Tuning settings you want to apply. Both channel and
power settings are selected by default.
4 If you accessed the wizard from the toolbar, select the scope. You can
select a Mobility Domain, WX switch, MAP access point, or radio profile.
5 Click Next. The progress is displayed.
6 Click Finish.
To Next Page
Loading...
