210 CHAPTER 5: CONFIGURING WX SYSTEM AND ADMINISTRATIVE PARAMETERS
Setting System
Information
To set system information:
1 Do one of the following:
■ Open the WX Switch wizard, then select System Information under
Management Services in the organizer list of the System and
Administrative page.
■ In the Organizer panel, select Management Services under a WX
switch or Domain Policies, then select Edit > Properties.
Here is an example of the System Information page in the WX Switch
wizard.
2 In the Contact box, type the contact name for the WX.
3 In the Prompt box, type the CLI prompt for the WX.
To Next Page
Loading...
