216 CHAPTER 5: CONFIGURING WX SYSTEM AND ADMINISTRATIVE PARAMETERS
strings are commonly used and can easily be guessed. You cannot edit
the TRAP community string.
4 You can enable the following SNMP traps:
■ Authentication — Generated when the WX switch’s SNMP agent
receives a bad community string.
■ LinkDown — Generated when the link is lost on a port.
■ LinkUp — Generated when the link is detected on a port.
■ DeviceFail — Generated when an event with an Alert severity occurs.
■ DeviceOkay — Generated when a device returns to its normal state.
■ PoEFail — Generated when a serious PoE problem, such as a short
circuit, occurs.
■ MAPTimeout — Generated when a MAP access point fails to
respond to the WX switch.
■ MobilityDomainJoin — Generated when the WX switch is initially
able to contact a mobility domain seed member, or can contact the
seed member after a timeout.
■ MobilityDomainTimeout — Generated when a timeout occurs after
a WX switch has unsuccessfully tried to communicate with a seed
member.
■ MichaelMICFailure — Generated when two Michael message
integrity code (MIC) failures occur within 60 seconds, triggering Wi-Fi
Protected Access (WPA) countermeasures.
■ RogueDetect — Generated when MSS detects a rogue access point.
■ MAPBoot — Generated when a MAP access point boots.
■ RFDetectAdhocUser — Generated when MSS detects an ad-hoc
user.
■ RFDetectRogueDisappear — Generated when a rogue access point
is no longer being detected.
■ ClientAuthenticationFailure — Generated when authentication
fails for a client.
■ ClientAuthorizationFailure — Generated when authorization fails
for a client.
■ ClientAssociationFailure — Generated when a client’s attempt to
associate with a radio fails.
To Next Page
Loading...
