Configuring WX Management Services 221
6 Do one of the following:
■ Go to “Setting Up a Syslog Server”.
■ Select another item in the WX Switch wizard, if you are using this
wizard.
■ Click Finish to close the wizard and save changes.
Setting Up a Syslog Server
You can specify a syslog server. Syslog facilities are identifiers that allow a
syslog server to handle different syslog messages from different sources.
You can use a facility in the range of Local 0 through Local 7.
To set up a syslog server
1 Do one of the following:
■ Open the WX Switch wizard, then select Syslog Server under
Management Services in the organizer list of the System and
Administrative page.
■ In the Organizer panel, select Management Services under a WX
switch or Domain Policies, then select Edit > Properties. Click on
Syslog Server at the top of the wizard.
Here is an example of the Syslog Server page in the WX Switch wizard.
To Next Page
Loading...
