246 CHAPTER 5: CONFIGURING WX SYSTEM AND ADMINISTRATIVE PARAMETERS
2 To enable DNS, select Enabled. To disable DNS, clear Enabled.
3 If you disabled DNS in step 2, go to step 5. Otherwise, go to the next
step.
4 In the Default DNS Domain box, type the default domain suffix that is
appended to a hostname if the hostname cannot be resolved as entered.
The suffix can be up to 64 characters long with no spaces or tabs.
5 Do one of the following:
■ Go to “Adding DNS Servers”.
■ Select another item in the WX Switch wizard, if you are using this
wizard.
■ Click Finish to close the wizard and save changes.
To Next Page
Loading...
