Using Access Control Lists for Security 361
Mapping ACLs to Ports, VLANs, or Virtual Ports
You can map ACLs to ports (or port groups), VLANs, or virtual ports. You
cannot map an ACL to a MAP port or a wired authentication port.
To map an ACL to ports, VLANs, or virtual ports:
1 In the Create ACL wizard, click ACL Map. The ACL Map page appears.
2 Do one of the following:
■ To map an ACL to a Distributed MAP, see “Mapping an ACL to a
VLAN”.
■ To map an ACL to a VLAN, see “Mapping an ACL to a VLAN” on
page 363.
■ To map an ACL to a port or port group, see “Mapping an ACL to a
Port” on page 364.
■ To map an ACL to a virtual port or port group in a VLAN, see
“Mapping an ACL to a Virtual Port” on page 365.
To Next Page
Loading...
