364 CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS
Mapping an ACL to a Port
1 In the ACL Map page, click New.
2 Select New ACL Port Map. The Create ACL Port Map dialog box
appears.
3 In the Direction list, select In to filter incoming packets or Out to filter
outgoing packets.
4 In the Port list, select the port or port group to which you want to map
the ACL.
You cannot map an ACL to a MAP port or a wired authentication port.
5 Click Finish to save the mapping. The Create ACL wizard reappears.
6 Click Finish to close the Create ACL wizard.
To Next Page
Loading...
