Verifying Configuration Information 377
To change verification options
1 On the toolbar of the Verification tab click Options. The Verification
Options dialog box appears.
2 Select the cases in which you want 3WXM to perform verification:
■ Verify changes only — 3WXM performs verification only on
configuration items that change, instead of verifying the entire
configuration when any change in that configuration occurs.
■ Verify on edits — 3WXM performs verification whenever you edit a
WX switch’s configuration.
■ Verify on deploy and export — 3WXM performs verification when
you select the option to deploy WX switches from 3WXM to the live
network.
■ Allow errors to be deployed and exported — 3WXM allows you
to deploy or export a WX switch’s configuration even if it contains
errors.
3Com recommends that you do not deploy a network plan that contains
configuration errors. Allowing configuration errors to be deployed to the
network can affect network stability.
To Next Page
Loading...
