378 CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS
■ Allow errors to be uploaded — 3WXM allows you to upload a WX
switch’s configuration into 3WXM even if it contains errors.
3 Click Close to place the changes into effect and close the dialog box.
Disabling and
Reenabling Rules
If you disable a rule, you can use the Verification Options dialog box to
reenable the rule. You also can disable rules, for the entire network plan
or for specific instances.
To disable or reenable a rule
1 On the toolbar of the Verification tab click Options. The Verification
Options dialog box appears.
2 Click Rules Control. The list of 3WXM verification rules appears.
3 Locate the rule you want to disable. You can click on the Class or Rule
headers to sort alphabetically by rule class or by rule name. You also can
filter the display to show only the rules in a specific class.
To Next Page
Loading...
