Using the Client Monitor Window 427
Client Location Mobility Domain, WX switch, MAP access point, and radio
that was dealing with the client.
Session ID ID used by 3Com equipment to track the session within
the Mobility Domain.
Auth Server IP System IP address of the WX switch that was attempting
to authenticate the client.
Note — The system IP address is listed even if the switch
was using a RADIUS server to authenticate the client.
SSID SSID the client was requesting.
Failure Cause
Description
Cause of the failure.
Table 37 Activity Details for Authorization Failure
Column Description
User Name Username of the client.
MAC Address MAC address of the client.
Auth Protocol Type 802.1X protocol used to authenticate the client:
■ EAP-TLS
■ MD5
■ NONE
■ PASS-THROUGH
■ PEAP
■ N/A
Location Policy Index Rule number of a location policy rule used to change
authorization attributes for the client.
Table 36 Activity Details for Authentication Failure (continued)
Column Description
To Next Page
Loading...
