446 CHAPTER 10: MONITORING THE NETWORK
Using the RF
Monitor Window
The RF Monitor window shows detailed RF information for each radio.
Radio information is displayed in the following tabs:
■ RF Neighborhood — lists the other transmitting devices that the
radio can hear.
■ SSID-BSSID Mapping — lists the MAC address associated with each
SSID the radio can hear
■ Activity — lists log messages for the radio
■ RF Environment — lists 802.11 statistics for the radio
If data does not appear in the window, check the bottom of the window
for a message. If the message Error: The requested service is not enabled
is displayed, you need to enable the RF Monitor options on the
monitoring service. By default, the monitoring service does not provide
RF data to the Monitor tab. To enable the service to provide RF data,
enable the RF Monitor options on the Monitoring Settings tab of the
To Next Page
Loading...
