3Com 3CRWX120695A - Generating a WX Configuration Report

486 CHAPTER 12: GENERATING REPORTS
Generating a WX
Configuration
Report
The WX configuration report lists configuration details for a WX switch.
1 Select Reports > WX Configuration from the toolbar in the main
3WXM window.
The WX Configuration Report dialog box appears.
2 Select the WX switch for which you want the report.
The scope is always Wireless Switch and cannot be changed.
3 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
4 To prevent 3WXM from replacing an existing report of the same type with
this new report, click next to Overwrite Existing Files to deselect this
option.
5 Click Generate.
6 When the report is generated, click the report link to view it.
Table 58 lists the sections in the report.
Table 57 Mobility Domain Configuration Report Sections
Section Description
Wireless Switches Name, model, and system IP address of each WX switch in
the Mobility Domain. The number of directly attached and
Distributed MAPs configured on each WX switch are also
listed.
VLANs VLANs configured on the WX switches.
Radio Profiles Radio profiles configured on the WX switches.
Service Profiles Service profiles configured on the WX switches.
RADIUS Server Groups RADIUS server groups configured on the WX switches.
RADIUS Servers RADIUS servers configured on the WX switches.