3Com 3CRWX120695A - Starting or Stopping the Monitoring Service; Enabling 3 WXM Client to Access the Monitoring Service

Starting or Stopping the Monitoring Service 537
Starting or
Stopping the
Monitoring Service
The monitoring service is started automatically when you complete
installation and starts automatically whenever you restart your system.
You can start the monitoring service from within 3WXM or from
Windows Services.
1 Display the Services window. Here is an example of the Services window
in Windows XP. (The window might look different on your system.)
2 Scroll down and select 3WXM Services.
3 Select the Start or Stop option.
4 Close the Services window.
5 Within 3WXM, enable it to access the service. (See “Enabling 3WXM
Client To Access the Monitoring Service”.)
Enabling 3WXM
Client To Access the
Monitoring Service
You must set up the connection between a 3WXM client and the
monitoring service. After the connection is set up, the 3WXM client
remembers the connection settings and automatically establishes a
connection to the monitoring service each time the client is started.