3Com 3CRWX120695A - Optimizing the RF Coverage Model

Optimizing the RF Coverage Model 179
After you import your RF measurements, you correct the attenuation
factors for the floor. Go to “Optimizing the RF Coverage Model” next for
information about this topic.
Optimizing the RF
Coverage Model
An attenuation library is a set of attenuation values for the RF obstacles
on a floor. After you import RF measurements from a site survey or apply
them from the RF measurements in your network to your network plan,
you rebuild a floor’s attenuation library using those RF measurements.
1 Access the Building wizard. Expand the Sites section of the Organizer
panel to the building or floor you want to view. Right-click on the
building or floor and select Edit.
The Modify Building wizard is displayed.