1-16
To do… Use the command… Remarks
Display the statistics of IPv6
packets and IPv6 ICMP packets
display ipv6 statistics
Display the statistics of IPv6 TCP
packets
display tcp ipv6 statistics
Display the IPv6 TCP connection
status
display tcp ipv6 status
Display the statistics of IPv6
UDP packets
display udp ipv6 statistics
Clear IPv6 dynamic domain
name cache information
reset dns ipv6 dynamic-host
Clear IPv6 neighbor information
reset ipv6 neighbors [ all | dynamic | interface
interface-type interface-number | static ]
Clear the statistics of IPv6
packets
reset ipv6 statistics
Clear the statistics of all IPv6
TCP packets
reset tcp ipv6 statistics
Clear the statistics of all IPv6
UDP packets
reset udp ipv6 statistics
Available in
user view
The display dns domain and display dns server commands are the same as those of IPv4 DNS. For
details about the commands, refer to DNS Operation in this manual.
IPv6 Configuration Example
IPv6 Unicast Address Configuration
Network requirements
Two switches are directly connected through two Ethernet ports. The Ethernet ports belong to VLAN 2.
Different types of IPv6 addresses are configured for the interface VLAN-interface 2 on each switch to
verify the connectivity between the two switches. The IPv6 prefix in the EUI-64 format is 2001::/64, the
global unicast address of Switch A is 3001::1/64, and the global unicast address of Switch B is
3001::2/64.
Network diagram
Figure 1-5 Network diagram for IPv6 address configuration
To Next Page
Loading...
