3Com 4200G PWR - Switch 4200 G-Front View Detail

3Com Switch 4200G Family 15
Command Reference
display radius
Use the display radius command to view the configuration information about all RADIUS schemes or a
specified scheme.
Any view
display radius statistics
Use the display radius statistics command to view the statistics information about RADIUS packet.
Any view
display rmon alarm
Use the display rmon alarm command to display the configuration of a specified alarm entry or all the
alarm entries.
Any view
display rmon event
Use the display rmon event command to display the configuration of a specified event entry or all the
event entries.
Any view
display rmon eventlog
Use the display rmon eventlog command to display the log of a specified event entry or all the event
entries.
Any view
display rmon history
Use the display rmon history command to display the RMON history information about a specified port.
The information about the latest sample, including utilization, the number of errors, the total number of
packets and so on, is also displayed.
Any view
display rmon prialarm
Use the display rmon prialarm command to display the configuration of a specified extended alarm entry
or all the extended alarm entries.
Any view
display rmon statistics
Use the display rmon statistics command to display the RMON statistics of a specified port.
Any view
display rsa local-key-pair public
Use the display rsa local-key-pair public command to display the public key of the server host key
pair. If no key pair is generated, the system prompts “%RSA keys not found”.
Any view
display rsa peer-public-key
Use the display rsa peer-public-key command to display the client public key of the specified RSA key
pair. If no key name is specified, the command displays all public keys of the client
Any view
display saved-configuration
Use the display saved-configuration command to display the content of the main configuration file in
the flash memory of a switch.
Any view
display schedule reboot
Use the display schedule reboot command to display information about scheduled reboot.
Any view
display snmp-agent
Use the display snmp-agent command to view engine ID of the local or remote SNMP entity.
Any view
display snmp-agent community
Use the display snmp-agent community command to view the information about the currently configured
community names for SNMPv1 or SNMPv2c.
Any view
display snmp-agent group
Use the display snmp-agent group command to view group name, security model, state of various views
and storage models.
Any view